ETC Cobalt 10 - Page 577

Cobalt 8.1 - 20181029
575
Selection logic for channel selection from numerical keypad with default Cobalt syntax (RPN mode).
See also Select Channels >>
Select Function Key Explanation
Select complete device
[1] [CHANNEL]
Selects the base channel
and all decimal channels
Select only base channel
[1] [.] [0]
[CHANNEL]
Selects only the base
channel.
Works with
PLUS/MINUS/THRU
Select only decimal
channels
[1] [.] [1]
[CHANNEL]
Selects only the decimal
channel.
Works with
PLUS/MINUS/THRU
Invert base/decimal
[INVERT] & [.]
Inverts the current
selection between base
channels and decimal
channels
Clear selected channels
[C/Alt] [C/Alt]
Clear