ETC Cobalt 10 - Page 640

Cobalt 8.1 - 20181029
638
Action Key Feedback
1. Select Palette from the
list
Mouse, touch screen or
arrow keys.
The corresponding
channels are selected and
displayed in the Channel
Display list. The palette is
activated and Highlight
mode is turned on.
2. Focus one by one with
NEXT/LAST
[NEXT] & [LAST]
Each focused channel is
mapped to the channel
controls.
3. Update the Palette
[UPDATE_PALETTE]
(Softkey)
The Palette is updated and
you are returned to the
Focus Palette list to the
next Palette.
4. Exit Focus Mode
[FOCUS_MODE]
(Softkey)
Focusing mode is exited
and the Focus Palette tab is
closed.