Cobalt 8.1 - 20181029
860
Column Input Function
Flash Settings.
Flash mode
[MODIFY]
Toggles between
All/Intensities/Attributes. See Flash
Settings.
Flash use time
[MODIFY]
Toggles if flash uses time. See Flash
Settings.
Flash level
[#] [MODIFY]
Sets flash level #. See Flash Settings.
Exclude Record
[MODIFY]
Toggles Exclude intensity from
recording. See Exclude Int From
Record.
Dual Fader Mode
[MODIFY]
Sets dual fader mode setup for this
master. See Dual Fader Mode For
Sequences.
Mask
[MODIFY]
Assigns a Mask. See Mask in masters.
Page Time
Shows the Master Page time that affects
all In-Wait-Out times set in %. See
Master Page Times - Page Time.
NOTE
Times can be set in % or in seconds. This is selected in the Settings Attributes
- you can always toggle this by holding C before pressing MODIFY in the
In/Wait/Out columns
To Next Page
Loading...
