Agilent Technologies InfiniiVision 3000 X-Series - Reset Label Library to Factory Default

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 141
:TRIGger:NREJect {{0
| OFF} | {1 | ON}}
(see page 887)
:TRIGger:NREJect?
(see page 887)
{0 | 1}
:TRIGger:SWEep
<sweep> (see
page 888)
:TRIGger:SWEep? (see
page 888)
<sweep> ::= {AUTO | NORMal}
Table 49 General :TRIGger Commands Summary (continued)
Command Query Options and Query Returns
Table 50 :TRIGger:DELay Commands Summary
Command Query Options and Query Returns
:TRIGger:DELay:ARM:SL
OPe <slope> (see
page 890)
:TRIGger:DELay:ARM:SL
OPe? (see page 890)
<slope> ::= {NEGative | POSitive}
:TRIGger:DELay:ARM:SO
URce <source> (see
page 891)
:TRIGger:DELay:ARM:SO
URce? (see page 891)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:DELay:TDELay
:TIME <time_value>
(see page 892)
:TRIGger:DELay:TDELay
:TIME? (see page 892)
<time_value> ::= time in seconds
in NR3 format
:TRIGger:DELay:TRIGge
r:COUNt <count> (see
page 893)
:TRIGger:DELay:TRIGge
r:COUNt? (see
page 893)
<count> ::= integer in NR1 format
:TRIGger:DELay:TRIGge
r:SLOPe <slope> (see
page 894)
:TRIGger:DELay:TRIGge
r:SLOPe? (see
page 894)
<slope> ::= {NEGative | POSitive}
:TRIGger:DELay:TRIGge
r:SOURce <source>
(see page 895)
:TRIGger:DELay:TRIGge
r:SOURce? (see
page 895)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format