Agilent Technologies InfiniiVision 3000 X-Series - Triggers

Commands Quick Reference 4
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide 143
:TRIGger[:EDGE]:REJec
t {OFF | LFReject |
HFReject} (see
page 904)
:TRIGger[:EDGE]:REJec
t? (see page 904)
{OFF | LFReject | HFReject}
:TRIGger[:EDGE]:SLOPe
<polarity> (see
page 905)
:TRIGger[:EDGE]:SLOPe
? (see page 905)
<polarity> ::= {POSitive |
NEGative | EITHer | ALTernate}
:TRIGger[:EDGE]:SOURc
e <source> (see
page 906)
:TRIGger[:EDGE]:SOURc
e? (see page 906)
<source> ::= {CHANnel<n> |
EXTernal | LINE | WGEN} for the
DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | EXTernal | LINE |
WGEN} for the MSO models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
Table 52 :TRIGger[:EDGE] Commands Summary (continued)
Command Query Options and Query Returns
Table 53 :TRIGger:GLITch Commands Summary
Command Query Options and Query Returns
:TRIGger:GLITch:GREat
erthan
<greater_than_time>[s
uffix] (see page 909)
:TRIGger:GLITch:GREat
erthan? (see
page 909)
<greater_than_time> ::=
floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}
:TRIGger:GLITch:LESSt
han
<less_than_time>[suff
ix] (see page 910)
:TRIGger:GLITch:LESSt
han? (see page 910)
<less_than_time> ::=
floating-point number in NR3
format
[suffix] ::= {s | ms | us | ns |
ps}