H3C S3600 Series

Operation Manual – Port Isolation
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Port Isolation Configuration
1-3
III. Configuration procedure
# Add Ethernet1/0/2, Ethernet1/0/3, and Ethernet1/0/4 to the isolation group.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface ethernet1/0/2
[H3C-Ethernet1/0/2] port isolate
[H3C-Ethernet1/0/2] quit
[H3C] interface ethernet1/0/3
[H3C-Ethernet1/0/3] port isolate
[H3C-Ethernet1/0/3] quit
[H3C] interface ethernet1/0/4
[H3C-Ethernet1/0/4] port isolate
[H3C-Ethernet1/0/4] quit
[H3C] quit
# Display information about the ports in the isolation group.
<H3C> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3, Ethernet1/0/4