To Next Page

To Previous Page

Operation Manual – FTP and TFTP

H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1

FTP and TFTP Configuration

1-3

Switch

Network

Switch

Network

Figure 1-1 Network diagram for FTP configurations

The following configurations are performed on the FTP server:

z Creating local users

z Setting local user passwords

z Setting the password display mode for the local users

z Configuring service types for the local users

For commands used in these configurations, refer to the

“AAA-RADIUS-HWTACACS-EAD” module of this manual for: local-user, local-user

password-display-mode, password, and service-type.

II. Configuration procedure

Table 1-3 Configure an FTP server

Operation Command Description

Enter system view

system-view

—

Enable the FTP server

function

ftp server enable

Required

By default, the FTP server

function is disabled.

Set the connection idle

time

ftp timeout minutes

Optional

The default connection

idle time is 30 minutes.

H3C S3600 Series User Manual

Other manuals for H3C S3600 Series