H3C S3600 Series User Manual

Operation Manual – File System Management
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 File System Management
Configuration
1-9
1.3.1 Operation Prerequisites
Before performing the following operations, you must first ensure that:
z The relevant units support TFTP client.
z The TFTP server is started and reachable.
1.3.2 Operation Procedure
Perform the following operations in user view.
Table 1-8 Back up and restore configuration file
To do… Use the command… Remarks
Back up the current
configuration of a
specified unit
backup unit unit-id
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
Optional
Back up the current
configuration of the whole
fabric system
backup fabric
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
Optional
Restore the startup
configuration of a
specified unit
restore unit unit-id
startup-configuration from
{ source-addr | source-hostname }
filename.cfg
Optional
Restore the startup
configuration of the whole
fabric system
restore fabric
startup-configuration from
{ source-addr | source-hostname }
filename.cfg
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English