H3C S3600 Series User Manual

Operation Manual – File System Management
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 File System Management
Configuration
1-7
1.2.6 Prompt Mode Configuration
You can set the prompt mode of the current file system to alert or quiet. In alert mode,
the file system will give a prompt for confirmation if you execute a command which may
cause data loss, for example, deleting or overwriting a file. In quiet mode, such prompt
will not be displayed.
Table 1-7 Configuration on prompt mode of file system
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the prompt
mode of the file system
file prompt { alert |
quiet }
Required
By default, the prompt mode
of the file system is alert.
1.2.7 File System Configuration Example
# Display all the files in the root directory of the file system on the local unit.
<H3C> dir /all
Directory of unit1>flash:/
1 (*) -rw- 5822215 Jan 01 1970 00:07:03 s3600.bin
2 -rwh 4 Apr 01 2000 23:55:49 snmpboots
3 -rwh 428 Apr 02 2000 00:47:30 hostkey
4 -rwh 572 Apr 02 2000 00:47:38 serverkey
5 -rw- 1220 Apr 02 2000 00:06:57 song.cfg
6 -rw- 5026103 Jan 01 1970 00:04:34 s3600v1r1.bin
7 -rwh 88 Apr 01 2000 23:55:53 private-data.txt
8 (*) -rw- 1376 Apr 02 2000 01:56:28 config.cfg
15367 KB total (4634 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
# Copy the file flash:/config.cfg to flash:/test/, with 1.cfg as the name of the new file.
<H3C> copy flash:/config.cfg flash:/test/1.cfg
Copy unit1>flash:/config.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
<H3C> dir /all

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English