H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 6 IGMP Configuration
6-12
Operation Command Description
Enter Ethernet port view
interface interface-type
interface-number
—
Configure router ports to
join a multicast group
igmp host-join
group-address vlan
vlan-id
Optional
By default, the router port
does not join in any
multicast group.
6.2.5 Configuring IGMP Proxy
I. Configure IGMP Proxy
You can configure IGMP proxy to reduce the workload of configuration and
management of leaf networks without affecting the multicast connections of the leaf
network.
After IGMP Proxy is configured on the Layer 3 switch of the leaf network, the leaf Layer
3 switch is just a host for the external network. The Layer 3 switch receives the
multicast data of corresponding groups only when it has directly connected members.
Table 6-6 Configure IGMP Proxy
Operation Command Description
Enter system view
system-view
—
Enable the multicast
routing protocol
multicast routing-enable
Required
Enter VLAN interface
(connected to the external
network) view
interface Vlan-interface
interface-number
—
Enable the IGMP protocol
igmp enable
Required
Configure IGMP Proxy
igmp proxy Vlan-interface
interface-number
Required
The IGMP Proxy feature is disabled by default.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English