H3C S3600 Series User Manual

Operation Manual – Routing Protocol
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 4
OSPF Configuration
4-26
Operation Command Description
Enable OSPF
Trap
snmp-agent trap enable ospf
[ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifauthfail | vifcfgerror |
virifrxbadpkt | virifstatechange
| viriftxretransmit |
virnbrstatechange ]*
Optional
You can configure OSPF
to send diversified SNMP
TRAP messages and
specify a certain OSPF
process to send SNMP
TRAP messages by
process ID.
4.8 Displaying and Maintaining OSPF Configuration
After the above configuration, you can use the display command in any view to
display and verify the OSPF configuration.
You can use the reset command in user view to reset the OSPF counter or
connection.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English