H3C S3600 Series User Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 2 Basic System Configuration
& Debugging
2-2
2.1.3 Setting the System Name of the Switch
Table 2-3 Set the system name of the switch
Operation Command Description
Enter system view
system-view
—
Set the system name of
the switch
sysname sysname
Optional
By default, the name is H3C.
2.1.4 Setting the Date and Time of the System
Table 2-4 Set the date and time of the system
Operation Command Description
Set the current date and
time of the system
clock datetime
HH:MM:SS
YYYY/MM/DD
Optional
The initial value is 23:55:00
04/01/2000 when the
system starts up.
2.1.5 Setting the Local Time Zone
This configuration task is to configure the name of the local time zone and the
difference between the local time zone and the standard universal time coordinated
(UTC) time.
Table 2-5 Set the local time zone
Operation Command Description
Set the local time zone
clock timezone
zone-name { add |
minus } HH:MM:SS
Optional
By default, it is the UTC
time zone.
2.1.6 Setting the Summer Time
This configuration task is to set the name, time range (start time and end time), and
time offset of the summer timer.
z When the system reaches the specified start time, it automatically adds the
specified offset to the current time, so as to toggle the system time to the summer
time.
z When the system reaches the specified end time, it automatically subtracts the
specified offset from the current time, so as to toggle the summer time to normal
system time.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English