H3C S3600 Series User Manual

Operation Manual – 802.1x
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
HABP Configuration
2-2
Operation Command Description
Configure the
interval to send
HABP request
packets.
habp timer interval
Optional
The default interval for an HABP server
to send HABP request packets is 20
seconds.
2.3 HABP Client Configuration
HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Table 2-2 Configure an HABP client
Operation Command Description
Enter system view
system-view
—
Enable HABP
habp enable
Optional
HABP is enabled by default. And a
switch operates as an HABP client after
you enable HABP for it.
2.4 Displaying HABP
After performing the above configuration, you can display and verify your HABP-related
configuration by execute the display command in any view.
Table 2-3 Display HABP
Operation Command Description
Display HABP configuration and
status
display habp
Display the MAC address table
maintained by HABP
display habp table
Display statistics on HABP packets
display habp traffic
These commands
can be executed in
any view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English