H3C S3600 Series User Manual

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
SSH Terminal Service
1-22
Table 1-13 Display SSH configuration
Operation Command Description
Display host and server
public keys
display rsa
local-key-pair public
Display client RSA public
key(s)
display rsa
peer-public-key [ brief |
name keyname ]
Display SSH status and
session information
display ssh server
{ status | session }
Display SSH user
information
display ssh
user-information
[ username ]
Display the current source
IP address or the IP
address of the source
interface specified for the
SSH server.
display ssh-server
source-ip
Display the mappings
between host public keys
and SSH servers saved on
a client
display ssh server-info
Display the current source
IP address specified for
the SSH2.0 Client.
display ssh2 source-ip
You can execute the
display command in any
view.
1.1.6 SSH Server Configuration Example
I. Network requirements
As shown in Figure 1-12, The PC (SSH Client) running an SSH2.0-supported client
software, establish a local connection with the switch (SSH Server) to ensure the
security of data exchange.
II. Network diagram
SSH Client
192.168.0.2/24
Vlan-inter
192.168.0
Switch
face1
.1/24
Figure 1-12 Network diagram for SSH server configuration

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English