H3C S3600 Series User Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 4
Device Management
4-2
Table 4-2 Reboot the Ethernet switch
Operation Command Description
Reboot the Ethernet switch reboot [ unit unit-id ] —
4.2.3 Scheduling a Reboot on the Switch
After you schedule a reboot on the switch, the switch will reboot at the specified time.
Table 4-3 Schedule a reboot on the switch
Operation Command Description
Schedule a reboot on the switch,
and set the reboot date and time
schedule reboot at hh:mm
[ mm/dd/yyyy | yyyy/mm/dd ]
Optional
Schedule a reboot on the switch,
and set the delay time for reboot
schedule reboot delay
{ hh:mm | mm }
Optional
Enter system view
system-view
—
Schedule a reboot on the switch,
and set the reboot period
schedule reboot regularity
at hh:mm period
Optional
 Note:
The switch timer can be set to precision of one minute, that is, the switch will reboot
within one minute after the specified reboot date and time.
4.2.4 Specifying the APP to be Adopted at Reboot
APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be adopted when the switch
reboots.
Table 4-4 Specify the APP to be adopted at reboot
Operation Command Description
Specify the APP to be
adopted at reboot
boot boot-loader
[ backup-attribute ] { file-url [ fabric ] |
device-name }
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English