H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 7 PIM Configuration
7-10
7.2 Common PIM Configuration
You can configure the PIM feature of the switch in interface view. The configuration
includes:
Table 7-1 Configuration tasks
Operation Description Related section
Enable PIM-DM
(PIM-SM) on the interface
Required
Section 7.2.1 "Enabling PIM-DM
(PIM-SM) on the Interface"
Configure the interval of
sending Hello packets
Optional
Section 7.2.2 "Configuring the
Interval of Sending Hello
Configure PIM neighbors Optional
Section
7.2.3 "Configuring PIM
Neighbors"
Clear the related PIM
entries
Optional
Section 7.2.4 "Clearing the Related
PIM Entries"
7.2.1 Enabling PIM-DM (PIM-SM) on the Interface
Table 7-2 Enable PIM-DM (PIM-SM) on the interface
Operation Command Description
Enter system view system-view —
Enable the multicast
routing protocol
multicast
routing-enable
Required
Enter VLAN interface
view
interface Vlan-interface
interface-number
—
Enable PIM-DM/PIM-SM
on the current interface
pim dm / pim sm
Optional
Configure the PIM
protocol type on the
interface
7.2.2 Configuring the Interval of Sending Hello Packets
PIM-DM must be enabled on each interface. After the configuration, PIM-DM sends
PIM Hello packets periodically and processes protocol packets that PIM neighbors
send.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English