H3C S3600 Series User Manual

Operation Manual – DHCP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
DHCP Server Configuration
2-27
II. Configuring the option 184 supporting function in interface view
Table 2-25 Configure the option 184 supporting function in interface view
Operation Command Description
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
—
Configure an IP address
for the interface
ip address ip-address net-mask
—
Configure the interface to
operate in DHCP server
mode and assign the IP
addresses of an
interface-based address
pool to DHCP clients
dhcp select interface
Required
Configure the NCP-IP
sub-option
dhcp server voice-config ncp-ip
ip-address
Required
Configure the AS-IP
sub-option
dhcp server voice-config as-ip
ip-address
Optional
Configure the voice
VLAN configuration
sub-option
dhcp server voice-config
voice-vlan vlan-id { enable |
disable }
Optional
Configure the Fail-over
call routing sub-option
dhcp server voice-config fail-over
ip-address dialer-string
Optional
 Note:
z Perform the operations listed in Table 2-25 in interface view if you specify to assign
IP addresses of an interface-based address pool to DHCP clients.
z This method allows you to configure the option 184 supporting function for a specific
interface.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English