H3C S3600 Series User Manual

Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
r
1-4
output. Therefore, when the severity threshold is set to “debugging”, all information will
be output. See
Table 1-2 for description of severities and corresponding levels.
Table 1-2 Severity definitions on the information center
Severity Value Description
emergencies 1 The system is unavailable.
alerts 2 Errors that need to be corrected immediately
critical 3 Critical errors
errors 4 Common errors
warnings 5 Warnings
notifications 6 Normal information that needs to be noticed
informational 7 Normal prompt information
debugging 8 Debugging information
Note that a slash (/) separates the level and digest.
6) Digest
It is a phrase within 32 characters, abstracting the information contents.
A colon (:) separates the digest and information contents.
 Note:
The above section describes the log information format sent to a log server by a switch.
Some log server software will resolve the received information as well as its format, so
that you may see the log format displayed on the log server is different from the one
described in this manual.
1.2 Information Center Configuration
The switch supports information output to six directions, and the system defaults to
assign one information channel for each output direction, as shown in
Table 1-3.
Table 1-3 Information channel names and numbers
Output direction Channel number Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English