H3C S3600 Series User Manual

Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
r
1-8
For example, to view log information of the switch on the console, you should not only
enable log information output to the console, but also enable log information terminal
display with the terminal logging command.
Perform the following operations in user view.
Table 1-7 Enable debugging/log/trap terminal display
Operation Command Description
Enable the
debugging/log/trap
information terminal
display function
terminal monitor
Optional
By default, this function is
enabled for console users.
Enable debugging
information terminal
display function
terminal debugging
Optional
By default, the debugging
information terminal display is
disabled.
Enable log information
terminal display
function
terminal logging
Optional
By default, log information
terminal display is enabled.
Enable trap
information terminal
display function
terminal trapping
Optional
By default, trap information
terminal display is enabled
1.2.4 Enabling Information Output to a Monitor Terminal
Table 1-8 lists the related configurations on the switch.
Table 1-8 Enable information output to a monitor terminal
Operation Command Description
Enter system view
system-view
—
Enable the
information center
info-center enable
Optional
By default, the information
center is enabled.
Enable information
output to Telnet
terminal or dumb
terminal
info-center monitor
channel { channel-number |
channel-name }
Required
By default, a switch outputs
log/debugging/trap
information to user terminal
through information channel
1.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English