H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3 Common Multicast Configuration
3-4
Operation Command Description
Clear the route
entries in the core
multicast routing
table
reset multicast routing-table { all |
{ group-address [ mask { group-mask |
group-mask-length } ] | source-address
[ mask { source-mask |
source-mask-length } ] |
{ incoming-interface interface-type
interface-number } } * }
Clear the route
entries in the core
multicast routing
table
3.3 Displaying Common Multicast Configuration
After the configuration above, you can execute the display command in any view to
verify the configuration by checking the displayed information.
The multicast forwarding table is mainly used for debugging. Generally, you can get the
required information by checking the core multicast routing table.
Table 3-6 Display common multicast configuration
Operation Command Description
Display the
statistics
information about
the suppression
on the multicast
source port
display
multicast-source-deny
[ interface interface-type
[ interface-number ] ]
This command can be executed in
any view.
z If neither the port type nor the
port number is specified, the
statistics information about the
suppression on all the
multicast source ports on the
switch is displayed.
z If only the port type is
specified, the statistics
information about the
suppression on the multicast
source ports of the type is
displayed.
z If both the port type and the
port number are specified, the
statistics information about the
suppression on the specified
multicast source port is
displayed.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English