H3C S3600 Series User Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 2 Basic System Configuration
& Debugging
2-3
Table 2-6 Set the summer time
Operation Command Description
Set the name and time
range of the summer
time
clock summer-time zone_name
{ one-off | repeating } start-time
start-date end-time end-date offset-time
Optional
2.1.7 Setting the CLI Language Mode
Table 2-7 Set the CLI language mode
Operation Command Description
Set the CLI language
mode
language-mode
{ chinese | english }
Optional
By default, the CLI language
mode is English.
2.1.8 Returning from Current View to Lower Level View
Table 2-8 Return from current view to lower level view
Operation Command Description
Return from current view
to lower level view
quit
This operation will result in exiting the
system if current view is user view.
2.1.9 Returning from Current View to User View
Table 2-9 Return from current view to user view
Operation Command Description
Return from current
view to user view
return
The composite key <Ctrl+Z> has the same
effect with the return command.
2.2 Displaying the System Status
You can use the following display commands to check the status and configuration
information about the system. For information about protocols and ports, and the
associated display commands, refer to relevant sections.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English