Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 BootROM and Host Software
Loading
1-2
Note:
The loading process of the BootROM software is the same as that of the host software,
except that during the former process, you should press <Ctrl+U> and <Enter> after
entering the BOOT menu and the system gives different prompts. The following text
mainly describes the BootROM loading process.
1.2.1 BOOT Menu
Starting......
***********************************************************
* *
* H3C S3600-28P-SI BOOTROM, Version 320 *
* *
***********************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date : Apr 10 2007, 15:30:51
CPU type : BCM4704
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB
Mac Address : 00e0fc123450
Press Ctrl-B to enter Boot Menu...
Press <Ctrl+B>. The system displays:
Password :
Note:
To enter the BOOT menu, you should press <Ctrl+B> within five seconds after the
information “Press Ctrl-B to enter BOOT Menu...” displays. Otherwise, the system
starts to extract the program; and if you want to enter the BOOT Menu at this time, you
will have to restart the switch.
To Next Page
Loading...
Need help?
General