H3C S3600 Series

Operation Manual – VLAN
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
VLAN Configuration
2-1
Chapter 2 VLAN Configuration
2.1 VLAN Configuration
2.1.1 Basic VLAN Configuration
Table 2-1 Basic VLAN configuration
Operation Command Description
Enter system view
system-view
—
Create multiple
VLANs in batch
vlan { vlan-id1 to
vlan-id2 | all
}
Optional
Create a VLAN and
enter VLAN view
vlan vlan-id
Required
The
vlan-id argument ranges
from 1 to 4,094.
Assign a name for
the current VLAN
name text
Optional
By default, the name of a VLAN is
its VLAN ID.
Specify the
description string of
the current VLAN
description text
Optional
By default, the description string
of a VLAN is its VLAN ID.
Caution:
When you use the vlan command to create VLANs, if the destination VLAN is an
existing dynamic VLAN, it will be transformed into a static VLAN and the switch will
output the prompt information.
2.1.2 Basic VLAN Interface Configuration
I. Configuration prerequisites
Create a VLAN before configuring a VLAN interface.