H3C S3600 Series User Manual

Operation Manual – Cluster
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Cluste
r
1-14
Operation Command Description
In system view
ndp enable interface
port-list
Enter
Ethernet
port view
interface
interface-type
interface-number
Enable
NDP on
specified
ports
In
Ethernet
port
view
Enable
NDP on
the port
ndp enable
Required
You can choose to
enable NDP on some
ports in system view or
enable NDP on a port
in Ethernet port view.
1.3.3 Enabling NTDP Globally and on a Specific Port
Table 1-14 Enable NTDP globally and a specific port
Operation Command Description
Enter system view
system-view
—
Enable NTDP globally
ntdp enable
Required
Enter Ethernet port view
interface interface-type
interface-number
—
Enable NTDP on the port
ntdp enable
Required
1.3.4 Enabling the Cluster Function
Table 1-15 Enable the cluster function
Operation Command Description
Enter system view
system-view
—
Enable the cluster
function globally
cluster enable
Optional
By default, the cluster function is enabled.
1.3.5 Accessing Shared FTP/TFTP Server from a Member Device
Perform the following operations in user view on a member device.
Table 1-16 Access shared FTP/TFTP server from a member device
Operation Command Description
Access the shared FTP server of
the cluster
ftp cluster
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English