H3C S3600 Series User Manual

Operation Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
QoS Configuration
1-12
QoS Specification Related command
Port priority Supported
priority priority-level
priority trust
TP —
traffic-limit
Priority remark —
traffic-priority
Redirect —
traffic-redirect
Queue
scheduling
Support SP, WFQ, and WRR
Support queue scheduling
configuration synchronization on
aggregated ports
queue-scheduler
Traffic statistics Supported
traffic-statistic
Set the priority
of protocol
packets
Supported
protocol-priority
1.3 Configuring the Mapping between 802.1p Priority and
Queues
The mapping between the local precedence and the outbound queue is one-to-one.
You can modify the mapping between the 802.1p priority and the outbound queue by
modifying the mapping between the 802.1p priority and the local precedence.
I. Configuration prerequisites
You have understood the mapping between the 802.1p priority and the local
precedence and the default mapping table.
II. Configuration procedure
Table 1-5 Configure the mapping table
Operation Command Description
Enter system view
system-view
—
Configure the
COS-to-local-precedence
mapping table
qos
cos-local-precedence-map
cos0-map-local-prec
cos1-map-local-prec
cos2-map-local-prec
cos3-map-local-prec
cos4-map-local-prec
cos5-map-local-prec
cos6-map-local-prec
cos7-map-local-prec
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English