H3C S3600 Series User Manual

Operation Manual – Port Basic Configuration
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1 Port Basic Configuration
1-12
Table 1-14 Enable the giant-frame statistics function
Operation Command Description
Enter system view
system-view
—
Enable the giant-frame
statistics function
giant-frame statistics
enable
Optional
By default, the
giant-frame statistics
function is not enabled.
1.2.13 Displaying Basic Port Configuration
After the above configurations, you can execute the display commands in any view to
display information about Ethernet ports, so as to verify your configurations.
You can execute the reset counters command in user view to clear the statistics of
Ethernet ports.
Table 1-15 Display basic port configuration
Operation Command Remarks
Display port configuration
information
display interface
[ interface-type |
interface-type
interface-number ]
Display information about
a specified optical port
display
transceiver-information
interface interface-type
interface-number
Display the
enable/disable status of
port loopback detection
display
loopback-detection
Display brief information
about port configuration
display brief interface
[ interface-type
interface-number ] [ |
{ begin | include |
exclude } string ]
Display the hybrid or trunk
ports
display port { hybrid |
trunk }
Display port information
about a specified unit
display unit unit-id
interface
You can execute the
display commands in any
view.
Clear port statistics
reset counters interface
[ interface-type |
interface-type
interface-number ]
You can execute the
reset command in user
view.
After 802.1x is enabled on
a port, clearing the
statistics on the port will
not work.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English