H3C S3600 Series User Manual

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 2 Basic System Configuration
& Debugging
2-4
Table 2-10 System information display commands
Operation Command Description
Display the current date
and time of the system
display clock
Display the version of the
system
display version
Display the information
about user accessing the
switch
display users [ all ]
Display the debugging
status
display debugging { fabric | unit
unit-id } [ interface interface-type
interface-number | module-name ]
You can execute
the display
command in any
view
2.3 Debugging the System
2.3.1 Enabling/Disabling System Debugging
The Ethernet switch provides a variety of debugging functions. Most of the protocols
and features supported by the Ethernet switch are provided with corresponding
debugging functions. These debugging functions help users diagnose and troubleshoot
the system faults.
The output of debugging information is determined by the following two settings:
z Protocol debugging setting, which controls whether the debugging information of a
protocol is output.
z Terminal display setting, which controls whether the debugging information is
output to the screen of a specific user.
The relationship between the two settings is as follows:

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English