H3C S3600 Series User Manual

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
SFTP Service
2-2
II. Enabling SFTP Server
Table 2-2 Enable SFTP Server
Operation Command Description
Enter system view
system-view
—
Enable SFTP Server
sftp server enable
Required
By default, SFTP Server is disabled.
III. Setting connection idle timeout time
You can set the idle timeout time for SFTP connections, so that the system can
automatically release a user connection when the user connection is idle for a time
longer than the time threshold you set.
Table 2-3 Set connection idle timeout time
Operation Command Description
Enter system view
system-view
—
Set idle timeout time for
SFTP connections
sftp timeout
time-out-value
Required
By default, the connection idle
timeout time is 10 minutes.
2.1.3 SFTP Client Configuration
The following table describes SFTP Client configuration tasks:
Table 2-4 SFTP Client configuration tasks
Operation
Command
Keyword
View Description
Start SFTP Client
sftp
System view Required
bye
exit
Stop SFTP Client
quit
SFTP client
view
Optional

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English