H3C S3600 Series User Manual

Operation Manual – SSH Terminal Service
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
SSH Terminal Service
1-4
Table 1-1 SSH2.0 Server configuration tasks
Operation Command Related section
Configure user interface(s) to
support specified protocol(s)
protocol inbound
Section “
Configuring
user interface(s) to
support specified
protocol(s)
"
Generate local RSA key pairs
rsa local-key-pair create
Destroy local RSA key pairs
rsa local-key-pair
destroy
Section “
Generating
or destroying local
RSA key pairs
"
Create an SSH user
ssh user username
Section “
Create an
SSH user
”
Specify a default
authentication type for SSH
users
ssh authentication-type
default
Configure authentication type
for an SSH user
ssh user username
authentication-type
Section”
Configuring
authentication type for
a user
"
Set SSH authentication
timeout time
ssh server timeout
Set SSH authentication retry
times
ssh server
authentication-retries
Set server key update interval
ssh server
rekey-interval
Configure SSH server to be
compatible with SSH1.x
clients
ssh server
compatible-ssh1x
enable
Section “
Configuring
SSH management
Configure a client public key
for an SSH user
ssh user username
assign rsa-key keyname
Section “
Configuring a
client public key for a
user
"
I. Configuring user interface(s) to support specified protocol(s)
Table 1-2 Configure user interface(s) to support specified protocol(s)
Operation Command Description
Enter system view
system-view
—
Enter the view of one or
multiple user interfaces
user-interface
[ type-keyword ] number
[ ending-number ]
Required
Set the login
authentication method
authentication-mode
scheme
[ command-authorizatio
n ]
Required

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English