H3C S3600 Series User Manual

Operation Manual – Cluster
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Cluste
r
1-15
Operation Command Description
Download a file from the shared
TFTP server of the cluster
tftp cluster get source-file
[ destination-file ]
Optional
Upload a file to the shared TFTP
server of the cluster
tftp cluster put source-file
[ destination-file ]
Optional
1.4 Cluster Member Configuration
Table 1-17 Cluster member configuration
Operation Command Description
Enter system view
system-view
—
Enter cluster view
cluster
—
Add a candidate device
to the cluster
add-member
[ member-number ]
mac-address H-H-H
[ password password ]
Optional
Remove a member
device from the cluster
delete-member
member-number
Optional
Reboot a specified
member device
reboot member
{ member-number |
mac-address H-H-H }
[ eraseflash ]
Optional
Return to system view
quit
—
Return to user view
quit
—
Switch between
management device
and member device
cluster switch-to
{ member-number |
mac-address H-H-H |
administrator }
Optional
You can use this command
switch to the view of a member
device and switch back.
1.5 Displaying and Maintaining Cluster Configuration
After the above configuration, you can execute the display command in any view to
display the configuration and running status of cluster, so as to verify your
configuration.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English