H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2 IGMP Snooping Configuration
2-14
Table 2-14 Display information about IGMP Snooping
Operation Command Description
Display the current IGMP
Snooping configuration
display igmp-snooping
configuration
Display IGMP Snooping
message statistics
display igmp-snooping
statistics
Display IP and MAC
multicast groups in one or
all VLANs
display igmp-snooping
group [ vlan vlanid ]
You can execute the
display commands in any
view.
Clear IGMP Snooping
statistics
reset igmp-snooping
statistics
You can execute the
reset command in user
view.
2.4 IGMP Snooping Configuration Example
2.4.1 Example 1
Configure IGMP Snooping on a switch.
I. Network requirements
Connect the router port on the switch to the router, and connect non-router ports that
belong to VLAN 10 to user PCs. Enable IGMP Snooping on the switch.
II. Network diagram
Internet
Multicast
Sw itc h
Router
Internet
Multicast
Sw itc h
Router
Figure 2-3 Network diagram for IGMP Snooping configuration
III. Configuration procedure
# Enable IGMP Snooping in system view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English