H3C S3600 Series

Operation Manual – Management VLAN
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Management VLAN Configuration
1-2
1.2 Management VLAN Configuration
1.2.1 Prerequisites
Before configuring the management VLAN, make sure the VLAN operating as the
management VLAN exists. If VLAN 1 (the default VLAN) is the management VLAN, just
go ahead.
1.2.2 Configuring the Management VLAN
Table 1-1 Configure the management VLAN
Operation Command Description
Enter system view
system-view
—
Configure a
specified VLAN to
be the management
VLAN
management-vlan
vlan-id
Required
By default, VLAN 1 operates as
the management VLAN.
Configure the
default route
ip route-static 0.0.0.0
0.0.0.0 { null
null-interface-number |
next-hop } [ preference
preference-value ]
[ reject | blackhole ]
[ detect-group
detect-group-id ]
[ description text ]
Required
Create the
management VLAN
interface and enter
the corresponding
VLAN interface view
interface
vlan-interface vlan-id
Required
Assign an IP
address to the
management VLAN
interface
ip address ip-address
mask [ sub ]
Required
By default, the management
VLAN interface has no IP
address.
Provide a
description string for
the management
VLAN interface
description string
Optional
By default, the description string
of the management VLAN
interface is “Vlan-interface vlan-id
Interface”.