H3C S3600 Series User Manual

Operation Manual – Routing Protocol
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3
RIP Configuration
3-9
 Note:
z The filter-policy import command filters the RIP routes received from neighbors,
and the routes being filtered out will neither be added to the routing table nor be
advertised to any neighbors.
z The filter-policy export command filters all the routes to be advertised, including
the routes imported by using the import-route command as well as RIP routes
learned from neighbors.
z The filter-policy export command without the routing-protocol argument filters all
the routes to be advertised, including the routes imported by the import-route
command.
V. Setting RIP preference
Table 3-9 Set RIP preference
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—
Set the RIP preference
preference value
Optional
The default RIP preference is 100.
VI. Enabling traffic to be forwarded along multiple equivalent RIP routes
Table 3-10 Enable traffic to be forwarded along multiple equivalent RIP routes
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—
Enable traffic
forwarded along
multiple equivalent RIP
routes
traffic-share-across-i
nterface
Optional
By default,
traffic-share-across-interface
is disabled
VII. Configuring RIP to import routes from another protocol
Table 3-11 Configure RIP to import routes from another protocol
Operation Command Description
Enter system view
system-view
—
Enter RIP view
rip
—

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English