H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 8 MSDP Configuration
8-16
Table 8-12 Display and debug MSDP configuration
Operation Command Description
Display the brief
information of MSDP
peer state
display msdp brief
Display the detailed
information of MSDP
peer status
display msdp peer-status
[ peer-address ]
Display the (S, G) state
learned from MSDP
peers
display msdp sa-cache
[ group-address |
[ source-address ] ]
[autonomous-system-number ]
Display the number of
sources and groups in
the MSDP cache
display msdp sa-count
[autonomous-system-number ]
Reset the TCP
connection with the
specified MSDP peer
reset msdp peer
peer-address
Clear the cached SA
messages
reset msdp sa-cache
[ group-address ]
Clear the statistics
information of the
specified MSDP peer
without resetting the
MSDP peer
reset msdp statistics
[ peer-address ]
You can execute the
display command in
any view.
II. Tracing the transmission path of an SA message over the network
You can use the msdp-tracert command in any view to trace the path along which the
multicast data travels from the multicast source to the destination receiver over the
network, so as to locate errors, if any.
Table 8-13 Trace the transmission path of an SA message over the network
Operation Command Description
Trace the
transmission path of
an SA message over
the network
msdp-tracert source-address
group-address rp-address [ max-hops
max-hops ] [ next-hop-info | sa-info |
peer-info ]* [ skip-hops skip-hops ]
You can execute
the msdp-tracert
command in any
view.
Trace the
transmission path of
messages sent by
the multicast source
over the network
mtracert source-address
[ group-address |
last-hop-router-address
group-address ]
You can execute
the
mtracertcomman
d in any view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English