H3C S3600 Series User Manual

Operation Manual – AAA-RADIUS-HWTACACS-EAD
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-15
Operation Command Description
Set the messenger
function
messenger time
{ enable limit interval |
disable }
Optional
By default, the messenger
function is disabled.
Set the self-service server
location function
self-service-url { disable
| enable url-string }
Optional
By default, the
self-service server
location function is
disabled.
Caution:
z On an S3600 series switch, each access user belongs to an ISP domain. You can
configure up to 16 ISP domains on the switch. When a user logs in, if no ISP domain
name is carried in the user name, the switch assumes that the user belongs to the
default ISP domain.
z If the system does not find any available accounting server or fails to communicate
with any accounting server when it performs accounting for a user, it will not
disconnect the user as long as the accounting optional command has been
executed, though it cannot perform accounting for the user in this case.
z The self-service server location function needs the cooperation of a
self-service-supported RADIUS server (such as CAMS, that is, comprehensive
access management server). Through self-service, users can manage and control
their account or card numbers by themselves. A server installed with the self-service
software is called a self-service server.
 Note:
H3C's CAMS Server is a service management system used to manage networks and
secure networks and user information. With the cooperation of other networking
devices (such as switches) in a network, a CAMS server can implement the AAA
functions and right management.
1.3.4 Configuring an AAA Scheme for an ISP Domain
You can configure an AAA scheme in one of the following two ways:

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English