To Next Page

To Previous Page

Operation Manual – Login

H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port

2-8

z The screen can contain up to 30 lines.

z The history command buffer can contain up to 20 commands.

z The timeout time of the AUX user interface is 6 minutes.

II. Network diagram

User PC running Telnet

Ethernet1/0/1

Ethernet

User PC running Telnet

Ethernet1/0/1

Ethernet

Figure 2-5 Network diagram for AUX user interface configuration (with th

authentication mode being none)

III. Configuration procedure

# Enter system view.

<H3C> system-view

# Enter AUX user interface view.

[H3C] user-interface aux 0

# Specify not to authenticate users logging in through the Console port.

[H3C-ui-aux0] authentication-mode none

# Specify commands of level 2 are available to users logging into the AUX user

interface.

[H3C-ui-aux0] user privilege level 2

# Set the baud rate of the Console port to 19,200 bps.

[H3C-ui-aux0] speed 19200

# Set the maximum number of lines the screen can contain to 30.

[H3C-ui-aux0] screen-length 30

# Set the maximum number of commands the history command buffer can store to 20.

[H3C-ui-aux0] history-command max-size 20

# Set the timeout time of the AUX user interface to 6 minutes.

[H3C-ui-aux0] idle-timeout 6

H3C S3600 Series User Manual

Other manuals for H3C S3600 Series