H3C S3600 Series User Manual

Operation Manual – Port Basic Configuration
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1 Port Basic Configuration
1-6
Table 1-5 Enable flow control on a port
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Enable flow control on the
Ethernet port
flow-control
By default, flow control is
not enabled on the port.
1.2.4 Configuring Access Port Attribute
Table 1-6 Configure access port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Set the link type of the
port to access
port link-type access
Optional
By default, the link type of
a port is access.
Add the current access
port to a specified VLAN
port access vlan vlan-id
Optional
1.2.5 Configuring Hybrid Port Attribute
Table 1-7 Configure hybrid port attribute
Operation Command Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface
interface-type
interface-number
—
Set the link type of the
port to hybrid
port link-type hybrid
Required
Set the default VLAN ID
for the hybrid port
port hybrid pvid vlan
vlan-id
Optional
If no default VLAN ID is set
for a hybrid port, VLAN 1
(system default VLAN) is
used as the default VLAN of
the port.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English