H3C S3600 Series User Manual

Operation Manual – SNMP-RMON
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
RMON Configuration
2-4
2.2.2 Configuring RMON
Table 2-1 Configure RMON
Operation Command Description
Enter system view
system-view
—
Add an event entry
rmon event event-entry
[ description string ] { log |
trap trap-community | log-trap
log-trapcommunity | none }
[ owner text ]
Optional
Add an alarm entry
rmon alarm entry-number
alarm-variable sampling-time
{ delta | absolute }
rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2
[ owner text ]
Optional
Before adding an alarm
entry, you need to use
the rmon event
command to define the
event to be referenced
by the alarm entry.
Add an extended
alarm entry
rmon prialarm entry-number
prialarm-formula prialarm-des
sampling-timer { delta |
absolute | changeratio }
rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2
entrytype { forever | cycle
cycle-period } [ owner text ]
Optional
Before adding an
extended alarm entry,
you need to use the
rmon event command
to define the event to be
referenced by the
extended alarm entry.
Enter Ethernet port
view
interface interface-type
interface-number
—
Add a history entry
rmon history entry-number
buckets number interval
sampling-interval [ owner text ]
Optional
Add a statistics entry
rmon statistics entry-number
[ owner text ]
Optional
 Note:
z The rmon alarm and rmon prialarm commands take effect on existing nodes only.
z For each port, only one RMON statistics entry can be created. That is, if an RMON
statistics entry is already created for a given port, you will fail to create another
statistics entry with a different index for the same port.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English