H3C S3600 Series User Manual

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 6
Logging in through NMS
6-1
Chapter 6 Logging in through NMS
6.1 Introduction
You can also log into a switch through an NMS (network management station), and
then configure and manage the switch through the agent module on the switch.
z The agent here refers to the software running on network devices (switches) and
as the server.
z SNMP (simple network management protocol) is applied between the NMS and
the agent.
To log into a switch through an NMS, you need to perform related configuration on both
the NMS and the switch.
Table 6-1 Requirements for logging into a switch through an NMS
Item Requirement
The management VLAN of the switch is configured. The route
between the NMS and the switch is available. (Refer to the
Management VLAN Configuration module for more.)
Switch
The basic SNMP functions are configured. (Refer to the
SNMP-RMON module for more.)
NMS
The NMS is properly configured. (Refer to the user manual of
your NMS for more.)
6.2 Connection Establishment Using NMS
PC
S3100
NMS
Network
PC
Switch
NMS
Network
Figure 6-1 Network diagram for logging in through an NMS

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English