H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-2
1.2.1 Switching between User Levels
You can switch from one user level to another by executing a related command and set
a password for the switching as required after logging in to a switch.
I. Setting a password for user level switching
Table 1-1 lists the operations to set a password for user level switching.
Table 1-1 Set a password for user level switching
Operation Command Description
Enter system view
system-view
—
Set a password for
switching from a lower
user level to the user level
specified by the level
argument
super password [ level
level ] { simple | cipher }
password
Optional
A password is necessary
only when a user switches
from a lower user level to
a higher user level.
II. Switching between user levels
Table 1-2 lists the operation to switch between user levels.
Table 1-2 Switch between user levels
Operation Command Description
Switch from the
current user level
to the user level
specified by the
level argument
super [ level ]
Required
Execute this command in user view.
If you have set a password for user
level switching by using the super
password command and you want to
switch from a lower user level to a
higher user level, you need to enter
the correct password. Otherwise, you
will remain at the original user level.
 Note:
z By default, you switch from the current user level to level 3.
z For the purpose of security, you cannot see the password you enter on the screen.
You will remain at the original user level if you fail to enter the correct password after
you have tried more than three times.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English