H3C S3600 Series User Manual

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3
Logging in through Telnet
3-2
Configuration Description
Make terminal services
available
Optional
By default, terminal services are
available in all user interfaces
Set the maximum number
of lines the screen can
contain
Optional
By default, the screen can contain up
to 24 lines.
Set history command
buffer size
Optional
By default, the history command buffer
can contain up to 10 commands.
VTY terminal
configuration
Set the timeout time of a
user interface
Optional
The default timeout time is 10
minutes.
3.1.2 Telnet Configurations for Different Authentication Modes
Table 3-3 lists Telnet configurations for different authentication modes.
Table 3-3 Telnet configurations for different authentication modes
Authenticatio
n mode
Telnet configuration Description
None
Perform
common
configuration
Perform common
Telnet
configuration
Optional
Refer to
Table 3-2.
Configure the
password
Configure the
password for local
authentication
Required
Password
Perform
common
configuration
Perform common
Telnet
configuration
Optional
Refer to Table 3-2.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English