Operation Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
QoS Profile Configuration
2-6
2.5 Displaying QoS Profile
After finishing the configurations mentioned above, you can execute the display
command in any view to check the running state of the QoS profile. You can verify the
configuration by checking the information on display.
Table 2-5 Display the QoS profile
Operation Command Description
Display the
configurations of
the QoS profile
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
You can execute the
display command in
any view