H3C S3600 Series User Manual

Operation Manual – Routing Protocol
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3
RIP Configuration
3-3
3.2 RIP Configuration Tasks
Table 3-1 RIP configuration tasks
Configuration task Description Related section
Enabling RIP Required
Section
3.3.2 I. “Enabling
RIP globally and on the
interface of a specified
network segment
”
Settin
opera
g the RIP
ting status
on an interface
Optional
Section 3.3.2 II. “Setting
the RIP operating status
on an interface
”
Configuring
basic RIP
functions
Specifying a RIP
version
Optional
Section
3.3.2 III.
“Specifying the RIP
version on an interface
”
Setting the
additional routing
metrics of an
interface
Optional
Section
3.4.2 I. “Setting
the additional routing
metrics of an interface
”
Configuring RIP
route summary
Optional
Section
3.4.2 II.
“Configuring RIP route
summary
”
Disabling the
receiving of host
routes
Optional
Section 3.4.2 III.
“Disabling the receiving of
host routes
”
Configuring RIP
to filter
incoming/outgoin
g routes
Optional
Section
3.4.2 IV.
“Configuring RIP to filter
incoming/outgoing routes
”
Setting RIP
preference
Optional
Section
3.4.2 V. “Setting
RIP preference
”
Enabling traffic to
be forwarded
along multiple
equivalent RIP
routes
Optional
Section
3.4.2 VI. Enabling
traffic to be forwarded
along multiple equivalent
RIP routes
”
Configuring RIP
route control
Configuring RIP
to import routes
from another
protocol
Optional
Section
3.4.2 VII.
“Configuring RIP to import
routes from another
protocol
”

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English