Operation Manual – Information Center
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
Information Cente
1-5
Output direction Channel number Default channel name
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP 5 snmpagent
Note:
Settings for the six output directions are independent. However, for any output direction,
you must first enable the information center to make all other settings effective.
Information center of the Ethernet switch features:
z Supporting six information output directions, namely, console (console), monitor
terminal (monitor), log host (loghost), trap buffer (trapbuffer), log buffer (logbuffer)
and SNMP (snmp agent).
z Filtering information by severities (information is divided into eight severity levels).
z Filtering information by modules where information is generated.
z Language options (Chinese or English) for information output to a log host.
1.2.1 Enabling Synchronous Terminal Output
To prevent your input from being interrupted by system information output, you can
enable the synchronous terminal output function, which echoes your input after each
system output. This makes your work with ease, for you no longer worry about losing
uncompleted inputs.
Table 1-4 Enable synchronous terminal output
Operation Command Description
Enter system view
system-view
—
Enable
synchronous
terminal output
info-center synchronous
Optional
By default, synchronous
terminal output is disabled.
Note:
Running the info-center synchronous command during debugging information
collection may result in a command prompt echoed after each item of debugging
information. To avoid unnecessary output, you are recommended to disable
synchronous terminal output in such cases.
To Next Page
Loading...
Need help?
General