H3C S3600 Series User Manual

Operation Manual – QoS-QoS Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2
QoS Profile Configuration
2-5
# Create the user domain test163.net and specify radius1 as your RADIUS server
group.
[H3C] domain test163.net
[H3C-isp-test163.net] radius-scheme radius1
[H3C-isp-test163.net] quit
# Define the ACL rules
[H3C] acl number 3000
[H3C-acl-adv-3000] rule 1 permit ip destination any
[H3C-acl-adv-3000] quit
# Define the QoS profile function
[H3C] qos-profile example
[H3C-qos-profile-example] traffic-limit inbound ip-group 3000 128 exceed drop
[H3C-qos-profile-example] traffic-priority inbound ip-group 3000 dscp 46
2.4 Applying the QoS Profile to the Port Manually
After this configuration, all the traffic actions in the QoS profile will be applied to the
current port.
I. Applying the QoS profile to the port in system view
You can apply the profile configurations to one port or more continuous ports manually
in system view.
Table 2-3 Apply the QoS profile to the port manually in system view
Operation Command Description
Enter system view
system-view
—
Apply the QoS profile
to the port manually
apply qos-profile profile-name
interface interface-list
Required
II. Applying the QoS profile to the current port in Ethernet port view
Table 2-4 Apply the QoS profile to the port manually
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Apply the QoS profile to
the current port manually
apply qos-profile profile-name
Required

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English