H3C S3600 Series User Manual

Operation Manual – PoE-PoE Profile
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
PoE Configuration
1-3
1.2 PoE Configuration Tasks
Table 1-1 PoE configuration tasks
Operation Description Related section
Enable the PoE feature
on a port
Required
Section
1.3 “Enabling the PoE
Feature on a Port
”
Set the maximum output
power on a port
Optional
Section
1.4 “Setting the Maximum
Output Power on a Port
”
Set PoE management
mode and PoE priority of
a port
Optional
Section 1.5 “Setting PoE
Management Mode and PoE
Priority of a Port
”
Set the PoE mode on a
port
Optional
Section 1.6 “Setting the PoE Mode
on a Port
“
Configure the PD
compatibility detection
feature
Optional
Section
1.7 “Configuring the PD
Compatibility Detection Feature
”
Configure PoE
over-temperature
protection on the switch
Optional
Section 1.8 “Configuring PoE
Over-Temperature Protection on
the Switch
”
Upgrade the PSE
processing software
online
Optional
Section
1.9 “Upgrading the PSE
Processing Software Online
”
1.3 Enabling the PoE Feature on a Port
Table 1-2 Enable the PoE feature on a port
Operation Command Description
Enter system view
system-view
—
Enter Ethernet port
view
interface interface-type
interface-number
—
Enable the PoE
feature on the port
poe enable
Required
By default, the PoE function on a
port is enabled by the default
configuration file when the device
is delivered

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English