Operation Manual – GVRP
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
GVRP Configuration
1-3
them by their destination MAC addresses and delivers them to different GARP
application (for example, GVRP) for further processing.
1.1.2 GVRP Packet Format
The GVRP packets are in the following format:
Figure 1-1 Format of GVRP packets
The following table describes the fields of a GVRP packet.
Table 1-1 Description of GVRP packet fields
Field Description Value
Protocol ID Protocol ID 1
Message
Each message consists of two parts:
Attribute Type and Attribute List.
—
Attribute Type
Defined by the specific GARP
application
The attribute type of
GVRP is 0x01.
Attribute List It contains multiple attributes. —
Attribute
Each general attribute consists of
three parts: Attribute Length, Attribute
Event, and Attribute Value.
Each LeaveAll attribute consists of two
parts: Attribute Length and LeaveAll
Event.
—
Attribute Length The length of the attribute 2 to 255