H3C S3600 Series User Manual

Operation Manual – AAA-RADIUS-HWTACACS-EAD
H3C S3600 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration
1-23
 Note:
Actually, the RADIUS protocol configuration only defines the parameters for
information exchange between switch and RADIUS server. To make these parameters
take effect, you must reference the RADIUS scheme configured with these parameters
in an ISP domain view (refer to section
1.3 "AAA Configuration").
1.4.1 Creating a RADIUS Scheme
The RADIUS protocol configuration is performed on a RADIUS scheme basis. You
should first create a RADIUS scheme and enter its view before performing other
RADIUS protocol configurations.
Table 1-12 Create a RADIUS scheme
Operation Command Description
Enter system view
system-view
—
Enable RADIUS
authentication and
accounting ports
radius client enable
Optional
By default, RADIUS
authentication and accounting
ports are enabled.
Create a RADIUS
scheme and enter its
view
radius scheme
radius-scheme-name
Required
By default, a RADIUS scheme
named "system" has already
been created in the system.
Caution:
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English