To Next Page

To Previous Page

Operation Manual – PoE-PoE Profile

H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1

PoE Configuration

1-9

III. Configuration procedure

# Upgrade the PSE processing software online.

<H3C> system-view

[H3C] poe update refresh 0290_021.s19

# Enable the PoE feature on Ethernet 1/0/1, Ethernet 1/0/2, and Ethernet 1/0/24.

[H3C] interface Ethernet 1/0/1

[H3C-Ethernet1/0/1] poe enable

[H3C-Ethernet1/0/1] quit

[H3C]interface Ethernet 1/0/2

[H3C-Ethernet1/0/2] poe enable

[H3C-Ethernet1/0/2] quit

[H3C] interface Ethernet 1/0/24

[H3C-Ethernet1/0/24] poe enable

[H3C-Ethernet1/0/24] quit

# Set the maximum output power of Ethernet 1/0/1 and Ethernet 1/0/2 to 12,000 mW

and 2,500 mW respectively.

[H3C] interface Ethernet 1/0/1

[H3C-Ethernet1/0/1] poe max-power 12000

[H3C-Ethernet1/0/1] interface Ethernet 1/0/2

[H3C-Ethernet1/0/2] poe max-power 2500

[H3C-Ethernet1/0/2] quit

# Set the PoE priority of Ethernet 1/0/24 to critical to guarantee the power feeding to the

AP to which this port connects.

[H3C] interface Ethernet 1/0/24

[H3C-Ethernet1/0/24] poe priority critical

[H3C-Ethernet1/0/24] quit

# Set the power supply management mode on the switch to auto (it is the default mode,

so this step can be ignored).

[H3C] poe power-management auto

# Enable the PD compatibility detect of the switch to allow the switch to supply power to

part of the devices noncompliant with the 802.3af standard.

[H3C] poe legacy enable

H3C S3600 Series User Manual

Other manuals for H3C S3600 Series