H3C S3600 Series User Manual

Operation Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 3 Common Multicast Configuration
3-3
3.2.2 Configuring Suppression on the Multicast Source Port
I. Configure suppression on the multicast source port in system view
Table 3-3 Configure suppression on the multicast source port in system view
Operation Command Description
Enter system view system-view —
Configure
suppression on
the multicast
source port
multicast-source-d
eny [ interface
interface-list ]
Required
The suppression on the multicast
source port feature is disabled by
default.
II. Configure suppression on the multicast source port in Ethernet port view
Table 3-4 Configure suppression on the multicast source port in Ethernet port view
Operation Command Description
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure suppression on
the multicast source port
in Ethernet port view
multicast-source-deny
Optional
The suppression on the
multicast source port
feature is disabled on all
ports of the switch by
default.
3.2.3 Clearing the Related Multicast Entries
Use the reset command in user view to clear the related statistics information about the
common multicast configuration.
Table 3-5 Clear the related multicast entries
Operation Command Description
Clear the
multicast
forwarding case
(MFC) forwarding
entries or
statistics
information about
the forwarding
entries
reset multicast forwarding-table
[ statistics ] { all | { group-address [ mask
{ group-mask | group-mask-length } ] |
source-address [ mask { source-mask |
source-mask-length } ] |
incoming-interface interface-type
interface-number } * }
Clear the related
MFC forwarding
entries

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English